Sold Out New
ASTTM F436M HARDENED FLAT WASHER

ASTM F436M HARDENED FLAT WASHER

AED 0.00

ASTM F436M HARDENED FLAT WASHER.

This specification covers the chemical, mechanical, and dimensional requirements for hardened steel washers for use with fasteners having nominal thread diameters of 1/4 through 4 in. and M12 through M100. These washers are intended for general-purpose mechanical and structural use with bolts, nuts, studs, and other internally and externally threaded fasteners. These washers are suitable for use with fasteners covered in Specifications A354, A449, A563, A563M, F959/F959M, and F3125.

Available Sizes:        M12- M100

Available Finish :    Hot Dip Galva / Black / Yellow / PTFE.

Clear selection
Request for Quote
SKU: N/A Category:

Description

ASTM F436M HARDENED FLAT WASHER.

This ASTM F436M hardened flat washer’s specification covers the chemical, mechanical and dimensional requirements for hardened steel washers.

These washers are for use with fasteners having nominal thread diameters of 1/4″  through 4″ and M12 through M100. These washers are suitable for use with fasteners covered in Specifications A354, A449, A563, A563M, F959/F959M, and F3125.

This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers.

Available Sizes:        M12- M100

Available Finish :    Hot Dip Galva / Black / Yellow / PTFE.

Type 1—Washers made of carbon steel.

Additional information

Sizes: 

M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M39, M42, M45, M48, M52, M56, M60, M64, M68, M72
Coating: 

BLACK, HOT DIP GALVANIZED, YELLOW

Description

ASTM F436M HARDENED FLAT WASHER.

This ASTM F436M hardened flat washer’s specification covers the chemical, mechanical and dimensional requirements for hardened steel washers.

These washers are for use with fasteners having nominal thread diameters of 1/4″  through 4″ and M12 through M100. These washers are suitable for use with fasteners covered in Specifications A354, A449, A563, A563M, F959/F959M, and F3125.

This specification covers the chemical, mechanical, and dimensional requirements for metric hardened steel washers.

Available Sizes:        M12- M100

Available Finish :    Hot Dip Galva / Black / Yellow / PTFE.

Type 1—Washers made of carbon steel.

Additional information

Sizes: 

M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M39, M42, M45, M48, M52, M56, M60, M64, M68, M72
Coating: 

BLACK, HOT DIP GALVANIZED, YELLOW